How to Install a Tank Tap

Tools required:                 Drill

                                             7/8” drill bit

 

 

Step 1:  Select desire location to mount the tank tap.

 

 

 

Step 2:  Drill a hole in desired location using drill with 7/8” bit.

 

 

Step 3:  Insert tank tap and turn nut clockwise until rubber seal is firmly attached.

 

 

 

Step 4:  Fill with water and check for leaks.

 

Step 5:  Once it is determined there is no leaks then the tank is ready to be filled with DevilsOwn Brew or your favorite methanol/water mixture once installed in the car.